well i have my first probolom with my engin 80cc it runs ok at idel but hit the gas and it couldnt get out of its oun way it sputters and has no rpms it shakes its way up to 20 then it runs ok but just dosnt have the tourq it ues to i have moved the needl up and down no improvement the plug seames to be ok not burnt or soked i figuer some one knows more than i do and may have some pointers its a crome dresser and it has been the shits till like a week ago any help would be apreceated my prob i think its a prob with my carb but idk any ideas thank you

Post edited by: nick, at: 2008/01/03 21:19

Nick, The first thing I would do is check for vacuum leaks. The carb and manifold have a tendency for the bolts to come lose. If this is the case, be sure your gasket's have no damage and use some lock-tite to keep them from coming lose. If you find no vacuum leaks let me know and we will go from there.
Sorry took so long, been very busy. My apologies

Above pliers is intake manifold. Be sure the two nuts are tight.


Post edited by: fairracing31, at: 2008/01/05 06:24

Even if the plug looks good, try a new one. Also as FR said, check the intake for leaks, both where the carb mounts and where the whole works mounts to the engine. I'd remove them and have a look at the gasket. If you do find the gasket is fried, you can make one buy one, or repair it with some "Seal-All".

Keep us posted.

WOW WELL LET ME SAY ifs been a bit my daughter pulld out the port to the computer so iv been in the dark ages for like a month thanks for the in put on the gaskit ya know what it was just like you said so thanks i hope you all know i apreceate the help by the way i did try that other site and well some ppl there where vary nice but some made me fell stupid just for asking any thing any way just not my way of enjoying my bike and thats what we are hear for right? well thanks i will try to post more often ps i love my ride its got tq again

EXELLENT! Stop in anytime!