Why Shop Spookytooth? Click Here

No Sales Tax! excludes CA

Flying Horse 66/80cc EPA Approved Black Angle Fire 2-Stroke Bicycle Engine Kit Item# FH-BEK80B-EPA

OUR PRICE: $189.95
List Price: $249.95
Description

Flying Horse is here to bring you the engine kit market’s first US Environment Protection Agency (E.P.A.) approved bicycle engine kit! The Flying Horse 66/80cc EPA Approved Black Angle Fire 2-Stroke Bicycle Engine Kit is here for any rider looking to strap a motor on their beach cruiser, mountain bike, or road bike and turn it in to the street-legal ride of your dreams. No more pedaling up steep hills or charging a battery only for it to die half way through your commute. With the (engine) you’ll get to where you need to go and back with ease.

Introducing the Market’s Only EPA Approved Engine Kit

2-stroke engines are notorious for putting out lots of exhaust filled with oil and fuel, which is why most cannot be used on the road. Compliant with EPA emissions standards, the specialized muffler included offers a catalytic converter with precious metals that help clean that exhaust coming from this engine, making them EPA approved for public use. Coupled with this ability to run a mere 1:100 ratio of gas to AMSOIL SABER Professional Synthetic 2-Stroke oil, this engine is sure to keep emissions as low as possible. Not only is a cleaner motor better the evironment, you'll feel your motor run a better than other motors out there.

Brand New Motor, Same Great Flying Horse Quality

Just because these engines are compliant with emission standards, it doesn’t mean these engine’s don’t tear up the track, trail, or streets like any awesome motor. Not only do these engines still get you up to 25-35 mph and up to 150 MPG fuel economy, they also come with the 66/80cc High Performance Carburetor to give it that extra boost of power and speed.

Of course, no motor would be useful without a balanced crank and upgraded crank bearings. This motor boasts superior crank components and balance over other engines on the market, and this clutch will make sure your motor engages and disengages smoothly. With its all-terrain rear drive sprocket, you better believe this engine kit was meant for anyone looking to use their motor as their main mode of transportation.

As always, each Flying Horse bicycle engine kit comes with an industry leading 6 month parts-exchange warranty

Gasoline operated products are NOT compliant with California Air Resources Board (C.A.R.B) for the use on/off Public roads. Due to C.A.R.B. restrictions orders shipped within California will be canceled and refunded.

Product Dimensions and Specifications

  • 2.5 HP (horse power)
  • 25 to 40 mph depending on the gear ratio and weight
  • Fuel Economy: 100-150 miles per gallon

The Flying Horse 66/80cc bicycle engine measures about 8.5in.x 7in.x 5in. (HxLxW). These engine fit standard men’s bicycle frames with tubing of 25mm to 29mm in diameter, and around 10in. of clearance from the cranks to the top to be of the frame. Larger frames may require modification to the frame in order to fit an engine.

NOTE: You must use a 1:100 ratio of gas to AMSOIL SABER Professional Synthetic 2-Stroke oil. Use of alternate oils and/or fuel ratios will cause sever damage to your engine. BikeBerry is not responsible for damages or defects to this engine due to the mishandling or improper use of the engine.

The engine chain does not interfere with your current drive chain and peddling because it rides on the opposite side of the bike sprocket.

Product Requirements

  • Installation is a breeze! The rider only needs some basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation).
  • Fits Most 26" Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11” of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1”).

Package includes

  1. Black Flying Horse 66/80cc E.P.A. Approved 2-Stroke Engine
  2. UPGRADED High Performance Profile Carburetor
  3. UPGRADED Exhaust Muffler w/ Catalytic Converter
  4. Complete Clutch Cable Assembly with Clutch Wire Clip
  5. Drive Chain Idler Pulley
  6. Top Quality Japanese 202 Main Bearings
  7. 415 Bike Engine Drive Chain
  8. Drive Chain Guard
  9. 2-Stroke Spark Plug
  10. Electron Ignition Coil (CDI)
  11. Locking Alloy Clutch Lever
  12. Upgraded Twist Throttle and Cable With Grip
  13. Updated 1.5L Black Teardrop Gas Tank (approx. ⅖ of a gallon)
  14. Fuel Line
  15. Throttle Cable
  16. Gasoline Tank Switch
  17. Sprocket Clamp Assembly
  18. 44 Tooth Chrome Drive Sprocket with 9 Holes
  19. Large Spring (Heat Shield Spring)
  20. Extension Spring (Recoil Spring)
  21. High Quality Japanese Bearings on Both Ends of Crank
  22. Required Hardware and Gaskets
  23. Magneto
  24. Kill Switch
  25. Bonus: Spark Plug Removal Tool (While Supplies Last)!
  26. Bonus: Standard Universal Mounting Bracket

Disclaimer: Operating this motorized bicycle and bicycle engine kit involved some risk of serious bodily injury. Buyer accepts responsibility for any and all vehicle operation that may lead to personal injury, economic loss, social distress, other losses, costs and damages. Seller is not responsible for injuries and/or damages resulting from operating this motorized bicycle or bicycle engine kit. Upon purchase, the buyer agrees to comply with local requirements and restrictions in areas where EPA approved engines are allowed on public roadways. Otherwise, the riders agrees to use products for racing (closed-course competition) only and not for on/off public roads.

Disclosure of accurate engine size: While we have chosen to use the long standing factory branding engine size of "80cc", the true displacement of the bicycle engine is 66cc. Down through the years China bicycle engine manufactures have advertised their biggest engine as 80cc, therefore we have listed them in the same way on our website. However, the bore and stroke of an 80cc being 47x38mm equals 66cc. Therefore the true displacement of the 80cc bike motor is 66cc. In the west, the volume of a cylinder is calculated by using the formula Volume = Pi x Radius Squared x Stroke. However,in the east the displacement of an engine includes the area of the cylinder head's combustion chamber as well as the volume of the cylinder. Therein lies a discrepancy between measuring standards by the manufactures in China with those in the United States. However, all "80cc" engine kits on the market today are actually 66cc in displacement size if measuring by US standards.

 

Best Price Guarantee

BikeBerry.com is committed to providing our customers with the best price available online! At BikeBerry.com we work hard to offer the most competitive pricing available, but if you find a lower price online, let us know and we'll match it! In fact, if you find a lower price within 30 days of your original purchase date, we'll refund you the difference.

Complete the Best Price Guarantee form below to request a quote or price difference refund.

Best Price Guarantee Terms and Conditions:

Item must be the identical model from an authorized U.S. dealer. Specifically, the product must have the same U.S. manufacturer's warranty, model number, and contain the same components. BikeBerry.com will price match only in-stock products.

BikeBerry.com reserves the right to verify another online company's product availability and price before issuing a price match.

BikeBerry.com does not match auction websites or refurbished products.

The Best Price Guarantee does not apply to obvious pricing errors or clearance/close-out items.

Best Price Guarantee applies to the total purchase price of the item. Total purchase price includes shipping, taxes, or other discounts.




  • * Required Fields

PRODUCT INFORMATION
BEST PRICE GUARANTEE
Reviews

Write Your Own Review

You're reviewing: Flying Horse 66/80cc EPA Approved Black Angle Fire 2-Stroke Bicycle Engine Kit

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Rating

Customers Q & A

Ask a Question
Don't see the answer you need?Ask a Product Expert! The answer will be emailed to you and then posted here.

1 Item(s)

per page
Q: Are the mounting bolts 8mm

Posted On: 9/23/2018 By: Drew

A: Yes, Newer iterations come with 8mm motor mount studs.

Have a question? Call 888-621-0455
Authorize.Net Merchant - Click to Verify  SSL Secured